5.8GHz 50W Amplifier

Main uses: Jamming, blocking, Lab equipment,factory 

Government vehicle communication, Electronic warfare, electronic countermeasure, anti drone, counter UAV, Government vehicle communication, Anti satellite navigation. SDR,

Key specification:

Pout >50W at any frequency in 5.725-5.85GHz

Pout>50W from -25℃ to 80℃

Description

• Pout>50W from -25℃ to 80℃
• Pout >50W at any frequency  in working frequency band
• GaN Device  ensure high efficiency and ultra broadband.
• Continuous wave output  suitable for  CW ,FM or AM modulation
• ALC control function of output power  or working current
• Over-high VSWR to avoid or reduce the damage from any mismatch
• Protection  over  short or open of output port
• Pout and Gain of Temperature  compensation
• Over-high temperature protection, Shutdown more than 75℃, auto-restart less than 50℃

Remarks

• PA should be operating on an appropriate radiator, otherwise it will shut down by over high-temperature.
• Pout port cannot open or short, otherwise may burn and damage PA.
• Pout port should should be connect to a probably Load, Attenuator or antenna (50 ohms, more than 100W handling Power, lower than VSWR 2.0). 
• The power supply range and polarity of power supply must be correct, otherwise will damage the PA.
• Pout probably lower than the rated power when input Power less than 5dBm; PA probably is damaged if Pin is higher than 12dBm

Specifications:

I/O Port